Reinforcement LShapeRebar/ro

Other languages:
UShape Rebar
Bent Shape Rebar
Arch

Arch Rebar LShape

poziția meniului
Arch → Rebar tools
Ateliere
Arch, BIM
scurtătură
Nici unul
Prezentat în versiune
0.17
A se vedea, de asemenea,
Bent Rebar, Rebar

Descriere

Instrumentul LShape Rebar permite utilizatorului să creeze o armătură LShape reinforcing bar în elementele structurale.

This tool is part of the Reinforcement Workbench, an external workbench that can be installed with the Addon Manager.

Cum se folosește

  1. Create a structure element
  2. Select any face of the structure
  3. Then select LShape Rebar from the rebar tools
  4. A task panel will pop-out on the left side of the screen as shown below
  5. Select the desired orientation
  6. Give the inputs like front cover, left side cover, right side cover, bottom cover, top cover, rounding and diameter of the rebar
  7. Select the mode of distribution either amount or spacing
  8. If spacing is selected, a user can also opt for custom spacing
  9. Pick selected face is used to verify or change the face for rebar distribution
  10. Click OK or Apply to generate the rebars
  11. Click Cancel to exit the task panel

Task panel for the tool

Proprietăți

Scrip-Programare

See also: Arch API, Reinforcement API and FreeCAD Scripting Basics.

The LShape Rebar tool can by used in macros and from the python console by using the following function: 

Rebar = makeLShapeRebar(f_cover, b_cover, l_cover, r_cover,
                        diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation="Bottom Left",
                        structure=None, facename=None):
  • O armătură tip LShape Rebar are patru orientări diferite:
    • Bottom Right
    • Bottom Left
    • Top Right
    • Top Left
  • Adaugă obiectul LShape reinforcing bar la obiectul structural selectat.
  • Dacă nu este dată nici o Structură și nici o Facename, ea va avea ca intrare fațeta selectat de utilizator.
  • Aici argumentul CoverAlong este de tip tuplă.
  • Returnează noul obiect Rebar.

Example

import FreeCAD, Arch, LShapeRebar

Structure = Arch.makeStructure(length=1000, width=1000, height=400)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = LShapeRebar.makeLShapeRebar(50, 20, 20, 20,
                                    8, 50, 4, True, 6, "Bottom Left", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)

Rebar2 = LShapeRebar.makeLShapeRebar(50, 50, 20, 20,
                                     8, 50, 4, True, 6, "Bottom Left", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)

Edition of the rebar

You can change the properties of the rebar with the following function: 

editLShapeRebar(Rebar, f_cover, b_cover, l_cover, r_cover,
                diameter, t_cover, rounding, amount_spacing_check, amount_spacing_value, orientation,
                structure=None, facename=None)

import LShapeRebar

LShapeRebar.editLShapeRebar(Rebar, 50, 50, 20, 20,
                            12, 50, 6, True, 5, "Top Right")

LShapeRebar.editLShapeRebar(Rebar2, 50, 50, 20, 20,
                            12, 70, 6, True, 5, "Top Right")


UShape Rebar
Bent Shape Rebar
Arch
BIM
User documentation